One of FLOORmaps Very First Logo Installed with Multi Layered Stencils
One of our very first logos installed in 2009 at Ameripolish in Lowell, AR. Still very new at our trade we needed the practice and they graciously let us use their space. It took 2 Layers to complete this design using our 3.4 mil vinyl stencils and dye on polished concrete. The first layer had all the colors, red, turquoise, gold, and green, leaving the 2nd layer with only black. These picture demonstrates the challenge and ease of masking between color applications.
Hawaii's Lion Coffee Logo installed using Ameripolish Classic turquoise, gold, red, green, and black concrete dyes on a previously sand colored polished concrete floor. Installing Lion Coffee second right panel of layer 1 using our 3.4 mil low tack vinyl stencils on polished concrete. Removing transfer tape of the second right panel of layer 1 for the Lion Coffee logo. Close up of removing transfer tape of the second right panel of layer 1 for the Lion Coffee logo. First layer fully installed and areas not needing the gold color application had been taped off with blue tape and left over backing paper from our 3.4 mil low tack vinyl stencils. Rachel uses a preval attached to a small glass jar of Ameripolish's Classic gold concrete dye to apply the color slowly in a side to side motion for smooth consistency. Areas that were masked off are now being revealed preparing for the other colors that install on this layer. Gold has been masked on the upper area of the Lion and Ameripolish Classic turquoise is being carefully applied to exposed areas. Masking continues to cover all gold areas in the text area of Hawaiian Islands to protect them from the red coloring that is next to be applied. Close up of masking to cover all gold text of Hawaiian Islands to protect them from the red coloring that is next to be applied. Our transfer tape was used to manually create the mask for these areas. Last color for this layer is the Ameripolish Classic green which is being applied with a clean rag. Layer 2 of the Lion Coffee logo has been applied and Ameripolish classic black is being applied with the preval air canister system. Close up of complete Lion Coffee logo installed with Ameripolish Classic concrete dye colors. Close up of complete Lion Coffee logo installed with Ameripolish Classic concrete dye colors. Full Lion Coffee logo installed in the Ameripolish office.